Fume and Dust Extraction Arm Systems in Tennessee

Tennessee Fume industrial exhaust systems are designed to capture smoke, fume, dust, high-temperature air, and corrosive gases. These "pollutants" are ducted to an air cleaner (purification system) before discharge to the outside or returned to the workspace. Capturing air-entrained materials is best accomplished at the emission source, defined as source capture.

Tennessee Fume extraction arms with hoods or suction nozzles are the number one tool to maximize source capture efficiency. They capture the contaminated airstreams while getting close to the source without disrupting or slowing down the work process or collecting too much useable product. When the task or workpiece is difficult to access, in an isolated area, or along awkward points on an assembly line, extraction arms are a proven solution for maximum particulate, smoke, and fume collection.

Multiple arm designs are available depending on the airstream constituents. The parameters evaluated are temperature, explosivity, corrosiveness, and particulate, all factors determining the type of arm that should be selected for a process application. Matching your expected exhaust volume and arm useage with the required exhaust CFM, pressure loses, and airstream being captured is what we do. SysTech has successfully applied extraction arms for over thirty years and will assist with the correct selection for your process.

Fume and Dust Extraction Arm Systems in Tennessee
Tennessee Fume Extraction Arm Optional Accessories

Tennessee Fume Extraction Arm Optional Accessories

Fume extraction arms have optional accessories that include:

Nozzles - To get even closer to source capture, suction nozzles and flexible suction nozzles are available.

Custom hoods – To maximize fume capture, standard circular or scoop-shaped hoods can be changed to a slotted design, rectangular, flat, or custom fabricated.

Ceiling Mount - For applications where arms are mounted/supported by the ceiling. The ceiling bracket varies in height depending on the height of the hard deck or Unistrut.

Floor Stanchion - When the ceiling is too high, or there are no walls, a floor stanchion can be used to mount the arm.

Wall Mount - A wall bracket designed to mount the arm to any wall or beam within the facility.

Tube materials – For those arms using tubing, construction materials include painted steel, aluminum, stainless steel, P.P., or PVC. Extraction arms that use flex hoses can use clear, fire retardant, high temperature, or anti-static hoses.

Hood lights – Lights can be attached to the arm hood to provide better vision at the work point. Often used in welding applications.

Contact Us

    Tennessee Stainless Steel Extraction Arms

    Tennessee Stainless Steel Extraction Arms

    Aggressive airstream chemistry may require the arms to be constructed of 304 stainless steel. The tubing and hood are stainless, with external adjustment joints at the hood and swivel joints. Arm assemblies have a wall mounting bracket and an internal damper for airflow adjustment and shutoff. The standard flex hose at the joints is an FDA Pur Antistatic hose. Stainless steel arm tube diameters vary from three to eight inches, and arm lengths from three feet up to fourteen feet, all suitable for washdown applications. 316 stainless steel construction is an available option.

    • Tubes, hood, internal shutoff damper, and duct connection collar are all constructed of 304SS
    • External joints are anodized aluminum.
    • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', and 14'.
    • Available in hanging and benchtop models.
    • 304 SS grab handle on the hood for easy mobility and positioning.
    • Clear anti-static FDA hose rated for 200 degrees Fahrenheit.
    • Optional fume exhaust fans in aluminum, carbon steel, or PVC.

    Tennessee Telescopic Fume Extraction Arm

    Telescopic extraction arms are designed to fit into confined spaces. They are used for those applications when the operator wants to "compress" the arm out of the way and pull it back to a working position. The unit will mount on the ceiling, wall, or floor stanchion. There are optional designs from which to choose. There is an arm with a ridged flex hose in six or eight-inch diameter having an operating range of seven feet to almost ten feet or a thin-walled tube design that is available in five-inch diameter and can telescope three feet out to seven feet. Both telescopic arm options would include a manual damper.

    • Arm diameters are 6" and 8", and the operating range (compression) is 4' to 7'.
    • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
    • Powder coated steel wall bracket is standard
    • Black hose rated up to 195 degrees Fahrenheit (intermittent 260 degrees Fahrenheit)
    • The hood is powder-coated aluminum and includes a grab handle and shutoff damper built within
    • Swivel base
    • Internal is telescopic
    Tennessee Telescopic Fume Extraction Arm

    Tennessee Fume Extraction Arms

    Industrial exhaust systems for capturing smoke, fume, dust, high-temperature air, and corrosive gases.

    General Purpose Tennessee Industrial Extraction Arm

    "General Purpose" Tennessee Industrial Extraction Arm

    We label these arms a standard issue because they can be universally applied to most fume and dust extraction applications. The general-purpose arm is suitable for capturing smoke, dust, or any non-corrosive product. They are constructed of smooth powder-coated steel or aluminum tubing, a capture hood with adjustment grips, flex hose joint covers, and external adjustment brackets for the hood and swivel joints. The assemblies come standard with a wall mounting bracket but also have ceiling and floor support brackets available. An internal damper is included for airflow adjustment or shutoff. The arm mounting brackets allow for 180⁰ and 360⁰ rotation. Arm diameter options range from three to ten inches, and arm lengths vary from three to thirty-two feet. The maximum airstream temperature for these arms is about 180 degrees Fahrenheit.

    Features and options:

    • An optional fume exhaust fan in aluminum, carbon steel, or PVC.
    • The wall bracket is powder-coated black.
    • A shutoff damper is built into the lower tube.
    • Includes duct connection collar
    • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', and 14'.
    • Grab handle around the hood that is aluminum powder-coated black.
    • Black hose rated for 195 degrees Fahrenheit (intermittent 260 degrees Fahrenheit)

    Fume Extraction Arms by County

    Fume Extraction Arms in Rhea County Fume Extraction Arms in Roane County Fume Extraction Arms in Robertson County Fume Extraction Arms in Rutherford County Fume Extraction Arms in Sequatchie County Fume Extraction Arms in Sevier County Fume Extraction Arms in Shelby County Fume Extraction Arms in Stewart County Fume Extraction Arms in Sullivan County Fume Extraction Arms in Sumner County Fume Extraction Arms in Tipton County Fume Extraction Arms in Trousdale County Fume Extraction Arms in Unicoi County Fume Extraction Arms in Weakley County Fume Extraction Arms in Davidson County Fume Extraction Arms in Dickson County Fume Extraction Arms in Dyer County Fume Extraction Arms in Fentress County Fume Extraction Arms in Giles County Fume Extraction Arms in Grainger County Fume Extraction Arms in Hamblen County Fume Extraction Arms in Hardeman County Fume Extraction Arms in Hawkins County Fume Extraction Arms in Hickman County Fume Extraction Arms in Humphreys County Fume Extraction Arms in Knox County Fume Extraction Arms in Loudon County Fume Extraction Arms in Maury County Fume Extraction Arms in McMinn County Fume Extraction Arms in McNairy County Fume Extraction Arms in Obion County Fume Extraction Arms in Overton County Fume Extraction Arms in Pickett County Fume Extraction Arms in Putnam County Fume Extraction Arms in Bedford County Fume Extraction Arms in Bledsoe County Fume Extraction Arms in Blount County Fume Extraction Arms in Bradley County Fume Extraction Arms in Cannon County Fume Extraction Arms in Cheatham County Fume Extraction Arms in Claiborne County Fume Extraction Arms in Cocke County