Minnesota Fume and Dust Extraction Arm Systems

Minnesota Industrial exhaust systems are designed to capture smoke, fume, dust, high-temperature air, and corrosive gases. These "pollutants" are ducted to an air cleaner (purification system) before discharge to the outside or returned to the workspace. Capturing air-entrained materials is best accomplished at the emission source, defined as source capture.

Multiple arm designs are available depending on the airstream constituents. The parameters evaluated are temperature, explosivity, corrosiveness, and particulate, all factors determining the type of arm that should be selected for a process application. Matching your expected exhaust volume and arm useage with the required exhaust CFM, pressure loses, and airstream being captured is what we do. SysTech has successfully applied extraction arms for over thirty years and will assist with the correct selection for your process.

Minnesota Fume extraction arms with hoods or suction nozzles are the number one tool to maximize source capture efficiency. They capture the contaminated airstreams while getting close to the source without disrupting or slowing down the work process or collecting too much useable product. When the task or workpiece is difficult to access, in an isolated area, or along awkward points on an assembly line, extraction arms are a proven solution for maximum particulate, smoke, and fume collection.

Minnesota Fume and Dust Extraction Arm Systems

Contact Us

    Minnesota Fume Extraction Arms

    Industrial exhaust systems for capturing smoke, fume, dust, high-temperature air, and corrosive gases.

    Exhaust Fans for Fume Extraction Arms in Minnesota

    Industrial exhaust system arms often need a connection to an exhaust fan for isolated applications or when needed for additional static resistance when connecting to an existing duct system. Fan CFM and static pressure must be examined in both cases to maintain system performance. When coupling with an exhaust fan, it should be constructed of similar or compatible materials to the extraction arm.

    Cast Aluminum Pressure Blowers

    Cast aluminum pressure blowers are typically supplied by manufacturers where there is a non-corrosive airstream. They are light, come in a wide range of designs, are compact, and are AMCA B spark-resistant as standard. Motors are available in single and three-phase TEFC and EXP frames.

    Carbon Steel Blowers

    If conditions of the airstream are suitable, a carbon steel painted fan is selected in a direct drive arrangement with a horizontal mount configuration that requires minimal space. Steel blowers have the option for AMCA construction up to AMCA A and 304 and 316 SS construction. Motors are available in single and three-phase TEFC and EXP frames.

    Industrial Plastic Fume Exhaust Fans

    Corrosive environments require materials of construction that will not degrade over time. Plastic construction is misunderstood as fragile, but industrial-grade designs are compatible with the harshest environment. The plastics typically used for construction are PVC or polypropylene (P.P.) and are an excellent choice for the efficient conveyance of corrosive, chemically laden, humid, or polluted gases, fumes, and air. Motors are available in single and three-phase TEFC and EXP frames.

    Fume Extraction Arm Exhaust Fans in Minnesota

    Minnesota ATEX Rated Fume Extraction Arms

    Explosion-rated extraction arms are available for the handling of explosive gases and dust. (The combustible materials need to be identified upfront to determine the arm selection and hose material, if there is particulate, is corrosive.) These extraction arms meet the requirements of the ATEX Directive 2014/34/E.U. Category 2 for gases and dust for Zones 1 and 21 (areas where an explosive atmosphere is likely to occur during regular operation). ATEX-rated fume arm tube diameters vary from four to eight inches, and arm lengths are optional from five feet up to twenty-three feet.

    • Model having a semi-transparent white P.U. hose for dust-related pollutants.
    • Flexible PE hose, fully grounded.
    • Models having black chemical resistance P.E. hose
    • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
    • Arm diameters include 4", 5", 6", and 8", and arm lengths include 5', 7', 10', 13', 16', and 23'.
    • They are manufactured following ATEX directive 2014/34/E.U. Category 2 for gases and dust.
    Minnesota ATEX Rated Fume Extraction Arms
    General Purpose Minnesota Industrial Extraction Arm

    "General Purpose" Minnesota Industrial Extraction Arm

    We label these arms a standard issue because they can be universally applied to most fume and dust extraction applications. The general-purpose arm is suitable for capturing smoke, dust, or any non-corrosive product. They are constructed of smooth powder-coated steel or aluminum tubing, a capture hood with adjustment grips, flex hose joint covers, and external adjustment brackets for the hood and swivel joints. The assemblies come standard with a wall mounting bracket but also have ceiling and floor support brackets available. An internal damper is included for airflow adjustment or shutoff. The arm mounting brackets allow for 180⁰ and 360⁰ rotation. Arm diameter options range from three to ten inches, and arm lengths vary from three to thirty-two feet. The maximum airstream temperature for these arms is about 180 degrees Fahrenheit.

    Features and options:

    • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', and 14'.
    • Black hose rated for 195 degrees Fahrenheit (intermittent 260 degrees Fahrenheit)
    • Includes duct connection collar
    • Grab handle around the hood that is aluminum powder-coated black.
    • An optional fume exhaust fan in aluminum, carbon steel, or PVC.
    • The wall bracket is powder-coated black.
    • A shutoff damper is built into the lower tube.
    Minnesota Stainless Steel Extraction Arms

    Minnesota Stainless Steel Extraction Arms

    Aggressive airstream chemistry may require the arms to be constructed of 304 stainless steel. The tubing and hood are stainless, with external adjustment joints at the hood and swivel joints. Arm assemblies have a wall mounting bracket and an internal damper for airflow adjustment and shutoff. The standard flex hose at the joints is an FDA Pur Antistatic hose. Stainless steel arm tube diameters vary from three to eight inches, and arm lengths from three feet up to fourteen feet, all suitable for washdown applications. 316 stainless steel construction is an available option.

    • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
    • Tubes, hood, internal shutoff damper, and duct connection collar are all constructed of 304SS
    • 304 SS grab handle on the hood for easy mobility and positioning.
    • Available in hanging and benchtop models.
    • Clear anti-static FDA hose rated for 200 degrees Fahrenheit.
    • External joints are anodized aluminum.
    • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', and 14'.

    Fume Extraction Arms by County

    Fume Extraction Arms in Redwood County Fume Extraction Arms in Renville County Fume Extraction Arms in Rice County Fume Extraction Arms in Roseau County Fume Extraction Arms in Sherburne County Fume Extraction Arms in Sibley County Fume Extraction Arms in Stearns County Fume Extraction Arms in Steele County Fume Extraction Arms in Stevens County Fume Extraction Arms in Swift County Fume Extraction Arms in Todd County Fume Extraction Arms in Traverse County Fume Extraction Arms in Wabasha County Fume Extraction Arms in Wadena County Fume Extraction Arms in Waseca County Fume Extraction Arms in Watonwan County Fume Extraction Arms in Wilkin County Fume Extraction Arms in Winona County Fume Extraction Arms in Wright County Fume Extraction Arms in Yellow Medicine County Fume Extraction Arms in Kittson County Fume Extraction Arms in Koochiching County Fume Extraction Arms in Lac qui Parle County Fume Extraction Arms in Lake of the Woods County Fume Extraction Arms in Le Sueur County Fume Extraction Arms in Mahnomen County Fume Extraction Arms in McLeod County Fume Extraction Arms in Meeker County Fume Extraction Arms in Mille Lacs County Fume Extraction Arms in Morrison County Fume Extraction Arms in Mower County Fume Extraction Arms in Nicollet County Fume Extraction Arms in Nobles County Fume Extraction Arms in Norman County Fume Extraction Arms in Olmsted County Fume Extraction Arms in Otter Tail County Fume Extraction Arms in Pine County Fume Extraction Arms in Pipestone County Fume Extraction Arms in Ramsey County Fume Extraction Arms in Red Lake County Fume Extraction Arms in Beltrami County Fume Extraction Arms in Big Stone County Fume Extraction Arms in Blue Earth County Fume Extraction Arms in Carlton County Fume Extraction Arms in Carver County Fume Extraction Arms in Chisago County Fume Extraction Arms in Clay County Fume Extraction Arms in Cottonwood County Fume Extraction Arms in Crow Wing County Fume Extraction Arms in Dakota County Fume Extraction Arms in Faribault County Fume Extraction Arms in Fillmore County Fume Extraction Arms in Freeborn County Fume Extraction Arms in Goodhue County Fume Extraction Arms in Hennepin County Fume Extraction Arms in Hubbard County Fume Extraction Arms in Isanti County Fume Extraction Arms in Itasca County Fume Extraction Arms in Kanabec County Fume Extraction Arms in Kandiyohi County Fume Extraction Arms in Aitkin County Fume Extraction Arms in Anoka County Fume Extraction Arms in Becker County