Georgia Fume and Dust Extraction Arm Systems

Georgia Industrial exhaust systems are designed to capture smoke, fume, dust, high-temperature air, and corrosive gases. These "pollutants" are ducted to an air cleaner (purification system) before discharge to the outside or returned to the workspace. Capturing air-entrained materials is best accomplished at the emission source, defined as source capture.

Multiple arm designs are available depending on the airstream constituents. The parameters evaluated are temperature, explosivity, corrosiveness, and particulate, all factors determining the type of arm that should be selected for a process application. Matching your expected exhaust volume and arm useage with the required exhaust CFM, pressure loses, and airstream being captured is what we do. SysTech has successfully applied extraction arms for over thirty years and will assist with the correct selection for your process.

Georgia Fume extraction arms with hoods or suction nozzles are the number one tool to maximize source capture efficiency. They capture the contaminated airstreams while getting close to the source without disrupting or slowing down the work process or collecting too much useable product. When the task or workpiece is difficult to access, in an isolated area, or along awkward points on an assembly line, extraction arms are a proven solution for maximum particulate, smoke, and fume collection.

Georgia Fume and Dust Extraction Arm Systems

Georgia ATEX Rated Fume Extraction Arms

Explosion-rated extraction arms are available for the handling of explosive gases and dust. (The combustible materials need to be identified upfront to determine the arm selection and hose material, if there is particulate, is corrosive.) These extraction arms meet the requirements of the ATEX Directive 2014/34/E.U. Category 2 for gases and dust for Zones 1 and 21 (areas where an explosive atmosphere is likely to occur during regular operation). ATEX-rated fume arm tube diameters vary from four to eight inches, and arm lengths are optional from five feet up to twenty-three feet.

  • Arm diameters include 4", 5", 6", and 8", and arm lengths include 5', 7', 10', 13', 16', and 23'.
  • Models having black chemical resistance P.E. hose
  • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
  • They are manufactured following ATEX directive 2014/34/E.U. Category 2 for gases and dust.
  • Flexible PE hose, fully grounded.
  • Model having a semi-transparent white P.U. hose for dust-related pollutants.
Georgia ATEX Rated Fume Extraction Arms

Economical Industrial Extraction Arms in Georgia


These extraction arms serve a similar function as the general-purpose extraction arm but are constructed with a flexible hose instead of metal tubing. This arm has cost savings, but some optional features are unavailable. These arms were designed for light-duty, intermittent applications and have limitations on some airstream constituents. Importantly, each application is reviewed upfront by SysTech will guide you through the selection process safely. Hose diameter alternatives range from four to eight inches, and arm lengths range from five to thirty-six feet. The standard hose material is blue PVC or white PVC with an option for PE-coated polyamide fabric for mild corrosive applications. Custom sizes can be designed using various parts for different arm models combined to make a new arm design.

Features and options:

  • Lowest possible pressure drop, which helps save energy and lowers sound levels
  • Unique ease of maneuverability
  • External arm support
  • Arm diameters include 4", 5", 6", and 8", and arm lengths include 5', 7', 10', 13', 16', 23', 30', and 36'.
  • Lightweight construction balanced by two gas springs.
  • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
  • Hood designed for maximum capture efficiency and extraction
  • High positional stability
Georgia Stainless Steel Extraction Arms

Georgia Stainless Steel Extraction Arms

Aggressive airstream chemistry may require the arms to be constructed of 304 stainless steel. The tubing and hood are stainless, with external adjustment joints at the hood and swivel joints. Arm assemblies have a wall mounting bracket and an internal damper for airflow adjustment and shutoff. The standard flex hose at the joints is an FDA Pur Antistatic hose. Stainless steel arm tube diameters vary from three to eight inches, and arm lengths from three feet up to fourteen feet, all suitable for washdown applications. 316 stainless steel construction is an available option.

  • External joints are anodized aluminum.
  • 304 SS grab handle on the hood for easy mobility and positioning.
  • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', and 14'.
  • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
  • Available in hanging and benchtop models.
  • Clear anti-static FDA hose rated for 200 degrees Fahrenheit.
  • Tubes, hood, internal shutoff damper, and duct connection collar are all constructed of 304SS
General Purpose Georgia Industrial Extraction Arm

"General Purpose" Georgia Industrial Extraction Arm

We label these arms a standard issue because they can be universally applied to most fume and dust extraction applications. The general-purpose arm is suitable for capturing smoke, dust, or any non-corrosive product. They are constructed of smooth powder-coated steel or aluminum tubing, a capture hood with adjustment grips, flex hose joint covers, and external adjustment brackets for the hood and swivel joints. The assemblies come standard with a wall mounting bracket but also have ceiling and floor support brackets available. An internal damper is included for airflow adjustment or shutoff. The arm mounting brackets allow for 180⁰ and 360⁰ rotation. Arm diameter options range from three to ten inches, and arm lengths vary from three to thirty-two feet. The maximum airstream temperature for these arms is about 180 degrees Fahrenheit.

Features and options:

  • Black hose rated for 195 degrees Fahrenheit (intermittent 260 degrees Fahrenheit)
  • Includes duct connection collar
  • The wall bracket is powder-coated black.
  • Grab handle around the hood that is aluminum powder-coated black.
  • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', and 14'.
  • An optional fume exhaust fan in aluminum, carbon steel, or PVC.
  • A shutoff damper is built into the lower tube.
Georgia Weld Fume Extraction Arm

Georgia Weld Fume Extraction Arm

The demand for weld smoke extraction arms is always high and mandates an arm category. Depending on the application, different designs use either smooth wall or flex hose tubing. Both designs use external positioning joints and a hood with an internal adjustable damper. The units are typically wall-mounted but have ceiling and floor support bracket options. Arm diameter options range from six to eight inches, and arm lengths vary from three feet up to thirty-six feet. Personal weld fume packages include a single extraction arm, exhaust fan, and air filter.

  • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
  • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', 14', 16', 23', 30', and 36'.
  • Shut off dampers built internally.
  • Low-pressure drop
  • Standard units include a wall bracket. Ceiling mount options are available.

Georgia Fume Extraction Arms

Industrial exhaust systems for capturing smoke, fume, dust, high-temperature air, and corrosive gases.

Fume Extraction Arms by County

Fume Extraction Arms in Wheeler County Fume Extraction Arms in Whitfield County Fume Extraction Arms in Wilcox County Fume Extraction Arms in Wilkinson County Fume Extraction Arms in Worth County Fume Extraction Arms in Rabun County Fume Extraction Arms in Rockdale County Fume Extraction Arms in Schley County Fume Extraction Arms in Screven County Fume Extraction Arms in Spalding County Fume Extraction Arms in Taliaferro County Fume Extraction Arms in Tattnall County Fume Extraction Arms in Telfair County Fume Extraction Arms in Terrell County Fume Extraction Arms in Thomas County Fume Extraction Arms in Tift County Fume Extraction Arms in Toombs County Fume Extraction Arms in Towns County Fume Extraction Arms in Treutlen County Fume Extraction Arms in Troup County Fume Extraction Arms in Turner County Fume Extraction Arms in Twiggs County Fume Extraction Arms in Upson County Fume Extraction Arms in Walton County Fume Extraction Arms in Ware County Fume Extraction Arms in Heard County Fume Extraction Arms in Henry County Fume Extraction Arms in Houston County Fume Extraction Arms in Irwin County Fume Extraction Arms in Jeff Davis County Fume Extraction Arms in Jenkins County Fume Extraction Arms in Lanier County Fume Extraction Arms in Laurens County Fume Extraction Arms in Liberty County Fume Extraction Arms in Long County Fume Extraction Arms in Lowndes County Fume Extraction Arms in Lumpkin County Fume Extraction Arms in McDuffie County Fume Extraction Arms in Meriwether County Fume Extraction Arms in Mitchell County Fume Extraction Arms in Muscogee County Fume Extraction Arms in Newton County Fume Extraction Arms in Oglethorpe County Fume Extraction Arms in Paulding County Fume Extraction Arms in Peach County Fume Extraction Arms in Crisp County Fume Extraction Arms in Dade County Fume Extraction Arms in Decatur County Fume Extraction Arms in Dooly County Fume Extraction Arms in Dougherty County Fume Extraction Arms in Early County Fume Extraction Arms in Elbert County Fume Extraction Arms in Emanuel County Fume Extraction Arms in Evans County Fume Extraction Arms in Floyd County Fume Extraction Arms in Fulton County Fume Extraction Arms in Gilmer County Fume Extraction Arms in Glascock County Fume Extraction Arms in Glynn County Fume Extraction Arms in Gordon County Fume Extraction Arms in Gwinnett County Fume Extraction Arms in Habersham County Fume Extraction Arms in Hall County Fume Extraction Arms in Haralson County Fume Extraction Arms in Hart County Fume Extraction Arms in Ben Hill County Fume Extraction Arms in Bibb County Fume Extraction Arms in Bleckley County Fume Extraction Arms in Brantley County Fume Extraction Arms in Bulloch County Fume Extraction Arms in Butts County Fume Extraction Arms in Candler County Fume Extraction Arms in Catoosa County Fume Extraction Arms in Charlton County Fume Extraction Arms in Chatham County Fume Extraction Arms in Chattahoochee County Fume Extraction Arms in Chattooga County Fume Extraction Arms in Cherokee County Fume Extraction Arms in Clarke County Fume Extraction Arms in Clayton County Fume Extraction Arms in Clinch County Fume Extraction Arms in Cobb County Fume Extraction Arms in Colquitt County Fume Extraction Arms in Columbia County Fume Extraction Arms in Coweta County Fume Extraction Arms in Appling County Fume Extraction Arms in Atkinson County Fume Extraction Arms in Bacon County Fume Extraction Arms in Banks County Fume Extraction Arms in Barrow County Fume Extraction Arms in Bartow County