Nassau County Fume and Dust Extraction Arm Systems

Nassau County Industrial exhaust systems are designed to capture smoke, fume, dust, high-temperature air, and corrosive gases. These "pollutants" are ducted to an air cleaner (purification system) before discharge to the outside or returned to the workspace. Capturing air-entrained materials is best accomplished at the emission source, defined as source capture.

Multiple arm designs are available depending on the airstream constituents. The parameters evaluated are temperature, explosivity, corrosiveness, and particulate, all factors determining the type of arm that should be selected for a process application. Matching your expected exhaust volume and arm useage with the required exhaust CFM, pressure loses, and airstream being captured is what we do. SysTech has successfully applied extraction arms for over thirty years and will assist with the correct selection for your process.

Nassau County Fume extraction arms with hoods or suction nozzles are the number one tool to maximize source capture efficiency. They capture the contaminated airstreams while getting close to the source without disrupting or slowing down the work process or collecting too much useable product. When the task or workpiece is difficult to access, in an isolated area, or along awkward points on an assembly line, extraction arms are a proven solution for maximum particulate, smoke, and fume collection.

Nassau County Fume and Dust Extraction Arm Systems
Nassau County Fume Extraction Arm Mounting and Supports

Nassau County Fume Extraction Arm Mounting and Supports

Fume extraction arms are continually moved, extended, and rotated, requiring them to be rigidly supported and mounted securely. A few factors affect mounting location: 1) the location of the fume source, 2) the coverage area for where the arm is used 3) the central system duct where the fume arm is connected.

Mounting options include:

Wall Mount - With duct systems running against a wall, mounting the arm (s) with brackets secured to a block wall or column is typical. If the central system duct is along the ceiling, on an outside wall, or mid-wall, there are designed brackets to fix the arm in place.

Bench Mount - Exhaust duct running along the floor allows mounting to a bench or tabletop. This mount has a standard option bracket for attaching the arm. Another standard bench mount is on a portable air filter or dust collector.

Ceiling Mount - Mounting the arms in the ceiling is an option if joists are present. A support weldment could be fabricated if a ceiling mount is a requirement. For low-weight short arms, the installation contractor can fabricate a wood fixture.

Stanchion Mount - When arms are located in the center of a facility having high bay areas, a stanchion will allow the mounting of an arm and hold it rigidly in place.

Economical Industrial Extraction Arms in Nassau County


These extraction arms serve a similar function as the general-purpose extraction arm but are constructed with a flexible hose instead of metal tubing. This arm has cost savings, but some optional features are unavailable. These arms were designed for light-duty, intermittent applications and have limitations on some airstream constituents. Importantly, each application is reviewed upfront by SysTech will guide you through the selection process safely. Hose diameter alternatives range from four to eight inches, and arm lengths range from five to thirty-six feet. The standard hose material is blue PVC or white PVC with an option for PE-coated polyamide fabric for mild corrosive applications. Custom sizes can be designed using various parts for different arm models combined to make a new arm design.

Features and options:

  • Arm diameters include 4", 5", 6", and 8", and arm lengths include 5', 7', 10', 13', 16', 23', 30', and 36'.
  • Lightweight construction balanced by two gas springs.
  • Hood designed for maximum capture efficiency and extraction
  • High positional stability
  • Lowest possible pressure drop, which helps save energy and lowers sound levels
  • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
  • Unique ease of maneuverability
  • External arm support

Nassau County Fume Extraction Arms

Industrial exhaust systems for capturing smoke, fume, dust, high-temperature air, and corrosive gases.

Nassau County Weld Fume Extraction Arm

Nassau County Weld Fume Extraction Arm

The demand for weld smoke extraction arms is always high and mandates an arm category. Depending on the application, different designs use either smooth wall or flex hose tubing. Both designs use external positioning joints and a hood with an internal adjustable damper. The units are typically wall-mounted but have ceiling and floor support bracket options. Arm diameter options range from six to eight inches, and arm lengths vary from three feet up to thirty-six feet. Personal weld fume packages include a single extraction arm, exhaust fan, and air filter.

  • Shut off dampers built internally.
  • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', 14', 16', 23', 30', and 36'.
  • Optional fume exhaust fans in aluminum, carbon steel, or PVC.
  • Standard units include a wall bracket. Ceiling mount options are available.
  • Low-pressure drop
General Purpose Nassau County Industrial Extraction Arm

"General Purpose" Nassau County Industrial Extraction Arm

We label these arms a standard issue because they can be universally applied to most fume and dust extraction applications. The general-purpose arm is suitable for capturing smoke, dust, or any non-corrosive product. They are constructed of smooth powder-coated steel or aluminum tubing, a capture hood with adjustment grips, flex hose joint covers, and external adjustment brackets for the hood and swivel joints. The assemblies come standard with a wall mounting bracket but also have ceiling and floor support brackets available. An internal damper is included for airflow adjustment or shutoff. The arm mounting brackets allow for 180⁰ and 360⁰ rotation. Arm diameter options range from three to ten inches, and arm lengths vary from three to thirty-two feet. The maximum airstream temperature for these arms is about 180 degrees Fahrenheit.

Features and options:

  • Black hose rated for 195 degrees Fahrenheit (intermittent 260 degrees Fahrenheit)
  • An optional fume exhaust fan in aluminum, carbon steel, or PVC.
  • Includes duct connection collar
  • Arm diameters include 3", 4", 5", 6", and 8", and arm lengths include 3', 5', 7', 8', 10', and 14'.
  • Grab handle around the hood that is aluminum powder-coated black.
  • The wall bracket is powder-coated black.
  • A shutoff damper is built into the lower tube.

Exhaust Fans for Fume Extraction Arms in Nassau County

Industrial exhaust system arms often need a connection to an exhaust fan for isolated applications or when needed for additional static resistance when connecting to an existing duct system. Fan CFM and static pressure must be examined in both cases to maintain system performance. When coupling with an exhaust fan, it should be constructed of similar or compatible materials to the extraction arm.

Cast Aluminum Pressure Blowers

Cast aluminum pressure blowers are typically supplied by manufacturers where there is a non-corrosive airstream. They are light, come in a wide range of designs, are compact, and are AMCA B spark-resistant as standard. Motors are available in single and three-phase TEFC and EXP frames.

Carbon Steel Blowers

If conditions of the airstream are suitable, a carbon steel painted fan is selected in a direct drive arrangement with a horizontal mount configuration that requires minimal space. Steel blowers have the option for AMCA construction up to AMCA A and 304 and 316 SS construction. Motors are available in single and three-phase TEFC and EXP frames.

Industrial Plastic Fume Exhaust Fans

Corrosive environments require materials of construction that will not degrade over time. Plastic construction is misunderstood as fragile, but industrial-grade designs are compatible with the harshest environment. The plastics typically used for construction are PVC or polypropylene (P.P.) and are an excellent choice for the efficient conveyance of corrosive, chemically laden, humid, or polluted gases, fumes, and air. Motors are available in single and three-phase TEFC and EXP frames.

Fume Extraction Arm Exhaust Fans in Nassau County

Nassau County County Fume Extraction Arms

Yulee FL Fume Extraction Arms Woodsburgh NY Fume Extraction Arms Woodmere NY Fume Extraction Arms Woodbury NY Fume Extraction Arms Williston Park NY Fume Extraction Arms Westbury NY Fume Extraction Arms West Hempstead NY Fume Extraction Arms Wantagh NY Fume Extraction Arms Valley Stream NY Fume Extraction Arms Upper Brookville NY Fume Extraction Arms University Gardens NY Fume Extraction Arms Uniondale NY Fume Extraction Arms Thomaston NY Fume Extraction Arms Syosset NY Fume Extraction Arms Stewart Manor NY Fume Extraction Arms South Valley Stream NY Fume Extraction Arms South Hempstead NY Fume Extraction Arms South Farmingdale NY Fume Extraction Arms South Floral Park NY Fume Extraction Arms Searingtown NY Fume Extraction Arms Seaford NY Fume Extraction Arms Sea Cliff NY Fume Extraction Arms Sands Point NY Fume Extraction Arms Salisbury NY Fume Extraction Arms Saddle Rock NY Fume Extraction Arms Saddle Rock Estates NY Fume Extraction Arms Russell Gardens NY Fume Extraction Arms Roslyn NY Fume Extraction Arms Roslyn Estates NY Fume Extraction Arms Roslyn Harbor NY Fume Extraction Arms Roslyn Heights NY Fume Extraction Arms Roosevelt NY Fume Extraction Arms Rockville Centre NY Fume Extraction Arms Port Washington NY Fume Extraction Arms Port Washington North NY Fume Extraction Arms Point Lookout NY Fume Extraction Arms Plandome NY Fume Extraction Arms Plandome Heights NY Fume Extraction Arms Plandome Manor NY Fume Extraction Arms Plainview NY Fume Extraction Arms Plainedge NY Fume Extraction Arms Oyster Bay Cove NY Fume Extraction Arms Old Westbury NY Fume Extraction Arms Old Bethpage NY Fume Extraction Arms Old Brookville NY Fume Extraction Arms Oceanside NY Fume Extraction Arms North Valley Stream NY Fume Extraction Arms North Wantagh NY Fume Extraction Arms North Massapequa NY Fume Extraction Arms North Merrick NY Fume Extraction Arms North New Hyde Park NY Fume Extraction Arms North Lynbrook NY Fume Extraction Arms North Hills NY Fume Extraction Arms North Bellmore NY Fume Extraction Arms New Hyde Park NY Fume Extraction Arms New Cassel NY Fume Extraction Arms Nassau Village-Ratliff FL Fume Extraction Arms Muttontown NY Fume Extraction Arms Munsey Park NY Fume Extraction Arms Mineola NY Fume Extraction Arms Mill Neck NY Fume Extraction Arms Merrick NY Fume Extraction Arms Matinecock NY Fume Extraction Arms Massapequa NY Fume Extraction Arms Massapequa Park NY Fume Extraction Arms Manorhaven NY Fume Extraction Arms Manhasset NY Fume Extraction Arms Manhasset Hills NY Fume Extraction Arms Malverne NY Fume Extraction Arms Malverne Park Oaks NY Fume Extraction Arms Lynbrook NY Fume Extraction Arms Long Beach NY Fume Extraction Arms Locust Valley NY Fume Extraction Arms Lido Beach NY Fume Extraction Arms Levittown NY Fume Extraction Arms Lawrence NY Fume Extraction Arms Laurel Hollow NY Fume Extraction Arms Lattingtown NY Fume Extraction Arms Lakeview NY Fume Extraction Arms Lake Success NY Fume Extraction Arms Kings Point NY Fume Extraction Arms Kensington NY Fume Extraction Arms Jericho NY Fume Extraction Arms Island Park NY Fume Extraction Arms Inwood NY Fume Extraction Arms Hilliard FL Fume Extraction Arms Hicksville NY Fume Extraction Arms Hewlett Harbor NY Fume Extraction Arms Hewlett Neck NY Fume Extraction Arms Hewlett NY Fume Extraction Arms Hewlett Bay Park NY Fume Extraction Arms Herricks NY Fume Extraction Arms Harbor Hills NY Fume Extraction Arms Harbor Isle NY Fume Extraction Arms Greenvale NY Fume Extraction Arms Great Neck NY Fume Extraction Arms Great Neck Estates NY Fume Extraction Arms Great Neck Gardens NY Fume Extraction Arms Great Neck Plaza NY Fume Extraction Arms Glenwood Landing NY Fume Extraction Arms Glen Head NY Fume Extraction Arms Glen Cove NY Fume Extraction Arms Garden City NY Fume Extraction Arms Garden City Park NY Fume Extraction Arms Garden City South NY Fume Extraction Arms Freeport NY Fume Extraction Arms Franklin Square NY Fume Extraction Arms Flower Hill NY Fume Extraction Arms Floral Park NY Fume Extraction Arms Fernandina Beach FL Fume Extraction Arms Farmingdale NY Fume Extraction Arms Elmont NY Fume Extraction Arms East Williston NY Fume Extraction Arms East Rockaway NY Fume Extraction Arms East Norwich NY Fume Extraction Arms East Massapequa NY Fume Extraction Arms East Meadow NY Fume Extraction Arms East Hills NY Fume Extraction Arms East Atlantic Beach NY Fume Extraction Arms Cove Neck NY Fume Extraction Arms Centre Island NY Fume Extraction Arms Cedarhurst NY Fume Extraction Arms Carle Place NY Fume Extraction Arms Callahan FL Fume Extraction Arms Brookville NY Fume Extraction Arms Bethpage NY Fume Extraction Arms Bellmore NY Fume Extraction Arms Bellerose NY Fume Extraction Arms Bellerose Terrace NY Fume Extraction Arms Bayville NY Fume Extraction Arms Bay Park NY Fume Extraction Arms Baxter Estates NY Fume Extraction Arms Barnum Island NY Fume Extraction Arms Baldwin NY Fume Extraction Arms Atlantic Beach NY Fume Extraction Arms Albertson NY Fume Extraction Arms